Unfinished work · Bathroom
Marcus’s bathroom stopped at 80 percent. Here’s how he got it finished.
The tile was half up, the toilet was in the hallway, and the crew had moved to another job. Marcus had paid for more than was built. Here’s what turned it around.
5 min read
This is a composite story, built from common situations homeowners describe. Names and details are illustrative.
On this page
A good start and a schedule that ran ahead
Marcus hired a contractor to redo the hall bathroom for $22,000: new tub, tile, vanity, lighting and fan. Demolition went fast. The plumber and electrician passed their rough inspections. The work looked careful.
The contract split the price into four payments. By the time tile started, Marcus had made three of them, $16,500 in all, or 75% of the price.
Then the crew started showing up two days a week instead of five. Then one. The contractor said a bigger job had “blown up” and promised to be back “next week.” That happened three weeks in a row.
When “next week” became a month
The moment it turned wasn’t an argument. It was a quiet math problem at the kitchen table. Marcus listed what was finished and what wasn’t, and put a rough price on the rest.
Tile, grout, vanity, toilet, trim, paint and fixtures were left. A second contractor would likely charge about $8,000 for that. Marcus had $5,500 left to pay. Paying ahead of the work had shrunk the cushion that would cover finishing it.
Seeing it on paper made the next step obvious. Stop paying ahead, write everything down, and give a clear date.
What the payment schedule said
- Payment 3
- “$5,500 due when tile work begins.”
- Schedule
- “Estimated completion: 6 to 8 weeks.”
The third payment was due when tile began, not when it was done. That’s a common setup, and it’s where the money got ahead of the work.
“Estimated” completion is also common. It gives the contractor room for delays, but it doesn’t say what happens if the work stops for weeks.
Some states set rules for this. In Florida, for example, a contractor who has been paid can’t stop work for 90 days without just cause, and that’s treated as evidence the contractor took more than the work was worth, unless the homeowner ended or materially broke the contract. Rules differ a lot by state, so check yours on our contractor rules by state pages. Our page on when a job counts as abandoned explains the general idea.
What to ask
What to ask when a contractor stops showing up
Put these in an email or letter. Keep it short and specific, with the dates.
- Can you confirm, by a specific date, the day your crew will be back and the days they’ll work?
- What’s left on the job, in your words? Here’s my list of what I see as unfinished.
- When do you expect to finish everything on the list?
- If you can’t return by that date, can we agree in writing to end the contract, with a credit for the unfinished work?
- Can you send lien releases for the plumber, electrician and tile supplier you’ve paid?
Get it in writing
What to get in writing next time
- Payments tied to finished work, like “due when tile is grouted and sealed,” not “when tile begins.”
- A completion date, with what happens if work stops for more than a set number of days.
- A short punch-list step before the final payment.
- A final payment big enough to matter, so both sides want to finish.
- Lien releases from the trades and suppliers before each payment.
Next step
What Marcus did, and what you can do
Marcus took dated photos of every wall, wrote a one-page list of what was finished and what wasn’t, and sent a letter giving a return date ten days out. He held the last payment and said why, plainly.
The contractor came back. They agreed in writing on a finish date and a revised payment: half of what was left when tile and fixtures were done, the rest after a walkthrough. If the contractor hadn’t come back, Marcus had what he needed to hire someone else and seek the difference. Our pages on a contractor who abandoned the job and paying for unfinished work explain those paths.
Want to see whether your payments run ahead of the work? Our free payment schedule checker lines them up for you. If the job hasn’t started yet, run the bid through the free check first.
Have a bid or contract in hand?
Our Free Bid Check reads it in about a minute and shows the biggest things to ask about, quoted from your own pages. No account needed.
Want a person to read every line?
Bid Review is $99. We check your bid against the 37-item OwnersBack Checklist and your state's rules, a real person on our team signs off, and it's back in two business days.
See Bid ReviewQuestions people ask
Should I pay a contractor for unfinished work?
Usually you pay for what’s been done and hold the rest until it’s finished, as the contract allows. Ask for a written list of what’s done and what’s left, and tie the next payment to that list. Our guide to holding back payment covers how to do it carefully.
When does a job count as abandoned?
It depends on your state and your contract. Some states set a number of days without work. Send a written notice with a firm date first, so there’s a clear record. See when a job counts as abandoned.
Can I hire someone else to finish?
Often yes, after written notice and a fair chance to return. Ending the contract the wrong way can cause problems, so read your termination clause first and keep photos of the work as it stands.
Sources
Rules change. We link to the official source for every rule we mention, so you can check what applies to you.
More stories
General information, not legal advice
These stories share general information to help you ask good questions. They aren't legal advice, and rules vary by state and city. For advice about your situation, talk with a licensed attorney or your state's contractor board.