Contracts & estimates
How to compare contractor bids, line by line
How to compare contractor bids line by line: match the scope, add the cost of what's missing, check allowances and payment terms, then choose with confidence.
Updated November 19, 2026 · 7 min read
You asked three contractors for a price and got three very different documents back. One is a single page with a total at the bottom. One is eight pages of line items. One is somewhere in between. They don't line up, and the totals are thousands of dollars apart.
That's normal. Each contractor writes estimates their own way, and each one made different guesses about your project. The good news is that you don't need to be an expert to compare them. You need to put them on the same lines, fill in the gaps, and ask a few questions in writing. Here's how.
Step 1: Get three bids on the same scope
Three bids give you a sense of the range without burying you in paperwork. California's Contractors State License Board suggests getting at least three written bids and making sure you compare them based on the same plans, specifications and scope of work.
The easiest way to get bids you can compare is to give every contractor the same written description of the job before they price it. It doesn't need to be fancy. A one-page list works:
- What you want removed and what you want installed
- Rough sizes (square feet of tile, linear feet of counter, number of windows)
- Any products you've already chosen, with model numbers
- Anything you plan to do yourself, like painting or buying fixtures
- When you'd like the work to start and finish
If you already have bids and didn't do this, that's fine. The next steps still work. They just take a little more digging.
Step 2: Put every bid on the same lines
Open a spreadsheet, or download our free bid comparison spreadsheet (no email needed). Make one row for each part of the job and one column for each contractor. For a bathroom, the rows might be:
- Demolition and haul-away
- Plumbing rough-in and fixtures
- Electrical (fan, lighting, outlets)
- Tile for the floor and shower walls
- Vanity, counter and mirror
- Drywall, paint and trim
- Permits and inspections
- Cleanup
Now go through each bid and fill in the cells. When a bid lists a price for that line, enter it. When it says the work is included but gives no price, write “included.” When it doesn't mention the line at all, leave it blank and highlight it. Those blanks are where most of the difference between bids hides.
If one bid is just a lump sum, ask that contractor for a breakdown by major category. Most will give one if you ask politely. It helps them too, because it shows you what you're paying for.
Step 3: Look closely at allowances
An allowance is a placeholder amount for something you haven't picked yet, like tile, cabinets or light fixtures. Allowances are useful, but they make bids hard to compare, because each contractor chooses their own number.
Say Bid A has a $1,500 tile allowance and Bid B has a $4,000 tile allowance. Bid A looks $2,500 cheaper. But if the tile you actually want costs $3,800, Bid A will go up by about $2,300 once you choose it, and maybe more if the contractor adds a markup on overages.
For each allowance, write down:
- The amount
- Whether it covers material only, or material and installation
- How overages are charged, and whether there's a markup
- Whether unused money is credited back to you
Then price what you actually want at a local store or showroom, and replace each allowance with your real number. Now the bids are much closer to an even comparison.
Step 4: Read the exclusions
Exclusions are the things a contractor is not including. Common ones are permits, debris removal, repairs to rot or damage found behind walls, moving appliances, painting, and patching drywall after electrical work. Some bids list exclusions clearly. Others leave them out, which means you have to ask.
A bid that excludes permits and haul-away isn't wrong. It just isn't the same bid as one that includes them. Our guide on what a contractor estimate should include has a full list of things to look for.
Step 5: Build an adjusted total
This is the step that changes most people's minds. For each bid, start with the total and add a fair estimate for every item that's missing, excluded or underfunded. Here's a simple example for a bathroom remodel. The numbers are made up to show the method.
- Bid A: $24,000. Excludes permits (about $600 in this example) and haul-away (about $500). The tile allowance is $2,300 short of the tile you want. Adjusted total: about $27,400.
- Bid B: $26,500. Includes permits and haul-away. The tile allowance covers your choice. Adjusted total: $26,500.
- Bid C: $29,000. Includes everything above, plus a new exhaust fan you hadn't thought about. Adjusted total: $29,000, with a small upgrade.
The bid that looked cheapest is now in the middle. That doesn't mean Contractor A did anything wrong. They priced a smaller job. Your job is to make sure you're comparing the same job.
Not sure what's missing from a bid? Our free bid check reads it and shows what's missing, vague or risky, quoted with page numbers. Your files aren't kept.
Step 6: Compare the deposit and payment schedule
Two bids with the same total can feel very different if one wants half the money up front. For each bid, look at:
- The deposit, as a dollar amount and as a percent of the total
- What has to be finished before each payment
- How much is held until the very end, after final inspection and your walk-through
Payments tied to finished, clearly described work protect you better than payments tied to dates. The Federal Trade Commission advises against paying the full amount up front and notes that some states limit how much a contractor can ask for as a down payment. In California, for example, the Contractors State License Board says a home improvement down payment can be no more than 10% of the contract price or $1,000, whichever is less. You can look up your state on our contractor deposit limits by state page, and read more in understanding contractor payment schedules.
Step 7: Compare the things that aren't price
Add a few more rows to your spreadsheet:
- License and insurance. Is a license number on the bid? Will they show proof of liability insurance? See how to check a contractor's license.
- Permits. Who pulls them, and who pays for them?
- Timeline. When can they start, and how long will it take? A lower price with a start date five months away may not work for you.
- Warranty. How long do they stand behind their work, and what does it cover?
- Changes. How are changes priced and approved? Look for written change orders signed before the extra work starts.
- Communication. Did they answer your questions clearly and on time? How a contractor handles the bid is a good preview of the project.
Why the cheapest bid can cost more
The FTC's advice is simple: don't automatically choose the lowest bidder, and ask for an explanation if there's a big difference among the estimates. A low bid can be honest and efficient. It can also mean the contractor missed something, left out work the others included, or expects to cover gaps with change orders later. The California board notes that a bid much lower than the others may reflect a mistake or missing work.
You don't have to guess which it is. Ask. A good contractor will be glad to explain how they got their number. For more on why prices spread out, see why contractor bids are so different. If you're weighing a single price, read is your contractor's quote fair?
Questions to send in writing
Email works best, because you get answers you can keep and compare. Send each contractor the questions that fit their bid:
- Can you break the total down by major category?
- Does your price include permits, inspections and debris removal?
- For each allowance, does it include installation? How are overages charged?
- What's not included that I might expect to be?
- How do you handle hidden damage found during demolition?
- What's the payment schedule, and what has to be done before each payment?
- What warranty do you give on your work?
- When could you start, and how long will the job take?
Add the answers to your spreadsheet. If an answer changes the price, ask for a revised bid so the new number is in writing.
Making the choice
Once your bids are on the same lines and you have adjusted totals, the decision usually gets much clearer. Pick the contractor whose adjusted price, payment terms, timeline and communication fit your project best. That may be the lowest bid, the highest, or the one in the middle.
Before you sign, make sure everything you agreed on, including the answers to your questions, is in the written contract. The FTC suggests asking for a written agreement even if your state doesn't require one, and making sure all blank spaces are filled in.
If you'd like a second set of eyes first, our $99 Bid Review checks your bid or contract against a 37-item checklist and your state's rules, with sources, and a person checks every finding before the report comes to you.
Sources
- Federal Trade Commission — Home improvement consumer advice
- California Contractors State License Board — How do I find the right licensed contractor?
This guide is general educational information, not legal advice. Rules vary by state and locality. Check with the relevant official agency or a licensed professional.
Have a proposal in hand?
We'll read it line by line and give you a report checked by an experienced reviewer, with the specific questions to ask before you sign or pay.