Skip to content
OwnersBack

Bonds, funds and insurance

Will my homeowners insurance cover damage my contractor caused?

The short answer

Your odds: Depends on the facts

Sometimes, but it is usually not the first policy that should pay. When a contractor damages your home, the contractor's liability insurance is normally the main source, and your homeowners policy may cover sudden damage, like a fire or a burst pipe, while excluding the cost of redoing the faulty work itself. If your insurer pays, it may go after the contractor to get its money back.

Steps to take
7
Laws and cases cited
6
Last checked

What to know

  • Start with the contractor's general liability insurance, because covering this kind of damage is what it is for.
  • Homeowners policies often cover sudden resulting damage but exclude the cost of fixing faulty workmanship itself.
  • If your own insurer pays, you owe your deductible, and the insurer may pursue the contractor to recover what it paid.
  • Where insurance falls short, a contractor's bond, a recovery fund or a claim in court can fill the gap.
On this page
  1. Whose insurance pays first?
  2. What homeowners insurance usually covers and excludes
  3. When the contractor has no insurance or won't cooperate
  4. How it works in your state
  5. What you can recover
  6. Mistakes that hurt your case
  7. Your state's rules, with sources
  8. What to gather
  9. What to do, step by step
  10. When to talk to a lawyer now
  11. Common follow-up questions
  12. Laws and cases on this page

The law, in detailTap a topic to open it.

Whose insurance pays first?

Think of it as layers. The contractor caused the damage, so the contractor and its general liability insurer should pay first. That policy exists to cover damage the contractor's work does to other people's property. Ask the contractor for the insurer's name and policy number in writing, and ask them to open a claim. If the contractor hesitates, remind them that reporting claims is part of having insurance.

Your homeowners policy is the second layer. It may cover sudden, accidental damage, such as a fire started by a torch, water from a pipe a plumber cut, or a ceiling that falls in, depending on your policy's terms and exclusions. You pay your deductible, and the insurer may then seek repayment from the contractor or its insurer, a process often called subrogation. If it recovers, you may get some or all of your deductible back.

Some contracts require the contractor to carry certain insurance or to list you as an additional insured. Read yours, and see what to do when a contractor damages your house.

What homeowners insurance usually covers and excludes

Every policy is different, so read yours, especially the exclusions. If you cannot find it, ask your agent for a full copy, not just the declarations page. In general terms, policies tend to treat these situations differently:

State law reflects the same split. Pennsylvania requires registered contractors to carry personal injury and property damage liability insurance, but notes that this insurance does not cover poor workmanship. That is why bad work usually becomes a contract claim against the contractor rather than an insurance claim. See suing for bad workmanship.

  • Often covered: sudden damage that results from the work, such as fire, smoke or a sudden water leak, subject to your deductible and limits.
  • Often excluded: the cost to tear out and redo faulty, defective or incomplete work itself.
  • Often excluded: damage from wear, long-term leaks, mold or settling, even if a contractor's work started it.
  • Sometimes limited: damage while the home is vacant or under major renovation, depending on your policy.

When the contractor has no insurance or won't cooperate

If the contractor refuses to report the claim, you can often contact its insurer directly once you have the policy information. Many states require contractors to show proof of liability insurance to get licensed, and New York requires a home improvement contract to disclose any insurance covering the work[1]. Your contract or your state licensing board's records may name the insurer.

A contractor's license bond is another possible source. In Washington, contractors must post a bond, and a residential homeowner can sue on it for breach of contract within two years after the work was substantially completed or abandoned[2]. In Oregon, homeowners can be paid from a residential contractor's bond only after a timely Construction Contractors Board complaint and, if that doesn't settle it, a court judgment the contractor doesn't pay[3][4]. Bonds are limited and shared among claimants, so they may not cover a large loss. See how to claim against a contractor's bond.

If there is no insurance at all, read what to do when your contractor had no insurance.

How it works in your state

State rules decide which of these routes exist. California, for example, requires every licensed contractor to post a $25,000 bond, and a homeowner harmed by a license-law violation can claim with the surety listed on the contractor's license record. A lower-level California appellate decision upheld an award against a contractor's license bond, including attorney fees, for a homeowner left with an unfinished, defective house[5].

Many recovery funds require a court judgment first, and they pay only certain losses, not every kind of damage. Maryland's fund, for example, does not pay consequential damages, interest or attorney fees[6]. Pick your state below to see your licensing board, bond rules, recovery fund and small claims limit. Your state's small claims limit matters too, since many contractor damage claims are small enough to file there without a lawyer.

What you can recover

Between insurance and a claim against the contractor, the goal is to cover the full cost of putting your home back the way it was. That can include repairs to the damaged areas, emergency work to stop further damage, cleaning, replacement of damaged belongings, temporary housing if the home was unlivable, and your deductible.

Insurance pays only what the policy covers, up to its limits, so expect gaps. Whatever the insurers do not pay, along with the cost of fixing the contractor's faulty work, is what you ask the contractor for directly. Courts generally will not let you collect twice for the same loss, so keep a clear record of what each source paid.

Mistakes that hurt your case

Insurance claims over contractor damage go wrong in predictable ways. Each one can shrink what you recover or hand an insurer a reason to say no.

  • Letting the contractor patch major damage off the books before anyone documents it.
  • Waiting to report to your insurer while the contractor promises to handle it.
  • Signing a release from the contractor's insurer that also gives up your claim for the faulty work.
  • Throwing out damaged materials before the adjusters see them.
  • Treating a denial as final without asking for it in writing with the policy language it relies on.

Your state's rules, with sources

Pick your state to see the rules that matter here, each linked to its official source.

What to gather

Tick things off as you collect them. Your list stays on this device only.

0 of 9 gathered

What to do, step by step

  1. 1

    Stop the damage from spreading

    Shut off water or power if needed, and pay for reasonable emergency fixes such as water extraction or tarping. Keep every receipt.

  2. 2

    Document everything

    Photograph and video the damage, the work area and any tools or materials involved before cleanup or repairs begin.

  3. 3

    Notify the contractor in writing

    Describe the damage, ask for the contractor's liability insurer and policy number, and ask them to open a claim within a few days.

  4. 4

    Report to your own insurer

    Many policies require prompt notice. Tell your adjuster the contractor caused the damage and give them the contractor's insurance details.

  5. 5

    Get repair estimates

    Have licensed contractors other than the one who caused the damage give written estimates, so the numbers are independent.

  6. 6

    Demand what insurance will not cover

    Send the contractor a written demand for your deductible and any uncovered repairs. OwnersBack Dispute Prep can organize your records into a dated timeline, evidence index and a demand letter you send in your own name.

  7. 7

    Use a bond, small claims or a lawyer

    If the contractor will not pay, look at its license bond, then court. Our guide to suing in small claims court covers smaller losses.

When to talk to a lawyer now

  • The damage is structural or large, or the home is unlivable.
  • Your insurer and the contractor's insurer each say the other should pay.
  • Your claim was denied and you believe the policy covers it.
  • An insurer is asking you to sign a release, or someone was injured.
Find a lawyer in your state

Turn this into a plan you can act on

We turn your paperwork, photos and messages into a dated timeline, an evidence index, a step-by-step plan and a demand letter. A person on our team checks every one.

Hiring someone new to finish the job? Check their bid for free before you sign.

Common follow-up questions

Should I file with my insurance or the contractor's?

Start by asking the contractor to report it to its liability insurer, and notify your own insurer at the same time so you do not miss a deadline. If the contractor's insurer stalls, your insurer can pay and then pursue the contractor.

Will my premium go up if I file a claim for contractor damage?

It might. Insurers treat claims differently, and rules vary by state. Ask your agent how a claim would be handled, but do not skip reporting a serious loss, since late notice can hurt your coverage.

Can I get my deductible back?

Often, if your insurer recovers from the contractor or its insurer, part or all of your deductible may come back to you. You can also include it in your demand to the contractor.

Does a contractor's insurance cover bad work?

Usually not the cost of redoing it. General liability policies are generally aimed at injuries and damage to other property, not fixing the contractor's own faulty work. That part is normally a claim against the contractor itself.

What if my neighbor's contractor damaged my house?

The same layers apply: the contractor's liability insurer first, then your own policy. See when a neighbor's contractor damages your property.

Laws and cases on this page

Each one was read on its source and checked on November 19, 2026.

  1. 1

    Statute · NY

    N.Y. Gen. Bus. Law § 771

    What it says

    In New York, a home improvement contract and every change to it must be in writing, signed by all parties, legible and in plain English, and you must get a signed copy before work starts. It must list the contractor's name, address, phone and any license number, approximate start and completion dates, the work and materials, the price, a lien notice, a notice about how your prepayments must be protected, any insurance covering the work, and, if progress payments are used, a schedule tied to stages of work. It must also tell you that you can cancel until midnight of the third business day after signing, except in certain emergencies you started.

    Keep in mind: New York only. This section lists what the contract must contain; what happens when a term is missing depends on the facts and on court decisions.

  2. 2

    Statute · WA

    Wash. Rev. Code § 18.27.040

    What it says

    Washington contractors must post a bond of $30,000 (general contractors) or $15,000 (specialty contractors). A residential homeowner can sue on the bond for breach of contract, but must start that action within two years from when the work was substantially completed or abandoned, and the winning side in such a case can recover costs, interest and reasonable attorneys' fees.

    Keep in mind: If claims exceed the bond, workers' wage claims are paid first, then breach of contract claims. Claimants other than residential homeowners are capped at half the bond.

  3. 3

    Statute · OR

    Or. Rev. Stat. § 701.081

    What it says

    In Oregon, a residential general contractor must carry a $25,000 surety bond, a residential specialty contractor $20,000, a residential limited contractor $15,000 and a residential developer $25,000. Locksmith, home inspector services, home services, home energy performance score and residential restoration contractors carry $15,000. A homeowner can be paid from that bond only through the Construction Contractors Board process in ORS 701.145, which requires a final court judgment if the dispute is not settled.

    Keep in mind: The bond is the most the surety will ever pay on all complaints combined, no matter how many years it is in force (ORS 701.068), so several claimants may have to share it. The board can require some contractors to carry a bond up to five times larger. The bond does not pay attorney fees, and costs plus interest paid from a residential bond are capped at $5,000 in total.

  4. 4

    Statute · OR

    Or. Rev. Stat. § 701.145

    What it says

    For work on a home, you file a complaint with Oregon's Construction Contractors Board, which tries to mediate the dispute. If you do not settle, you can be paid from the contractor's bond only by getting a final court judgment, or an arbitration award that a court has turned into a judgment. If the contractor does not pay that judgment, the board tells the bond company how much it must pay you (ORS 701.150).

    Keep in mind: You still must file the board complaint on time: first mail the contractor a notice by certified mail at least 30 days before filing (ORS 701.133), and for work on an existing home the board must receive the complaint within one year after the work was substantially completed (ORS 701.143). The board's payment order may not include attorney fees. The board itself says payout takes at least 60 days after it receives a certified copy of the judgment; that waiting period is not in the statute.

  5. 5

    Court decision · CA · Appellate Department, Superior Court of California, San Luis Obispo County

    Boliver v. Surety Co. of the Pacific, 72 Cal. App. 3d Supp. 22 (1977)

    What it says

    A homeowner whose house was left unfinished and defective sued the contractor and the surety company that issued the contractor's license bond. The court upheld the award against the bond, including attorney fees, because the homeowner had a right to fees from the contractor.

    Keep in mind: California decision from a superior court appellate department, which carries less weight than a Court of Appeal opinion. License bond amounts are limited and shared among all claimants. Other states' bond laws differ.

  6. 6

    Statute · MD

    Md. Code, Bus. Reg. § 8-405

    What it says

    Maryland's Home Improvement Guaranty Fund can pay a homeowner for an actual loss caused by a licensed contractor, up to $30,000 per claimant for one contractor and never more than you paid that contractor. You must file within 3 years after you discovered, or should have discovered, the loss.

    Keep in mind: Maryland only, for licensed contractors. You must live in the home or own no more than three residences, and certain relatives, employees, officers and partners of the contractor cannot claim. The fund does not pay attorney fees, court costs, interest, consequential, personal injury or punitive damages. Total awards for one contractor are capped at $250,000 across all claimants unless the contractor repays the fund, and you may have to arbitrate first if your contract requires it.

Legal information, not legal advice

This page explains the law in general terms so you can understand your options. It isn't legal advice for your situation, and reading it doesn't create an attorney-client relationship. Laws change and differ by state, and the facts of your case matter. OwnersBack isn't a law firm. Before you sue, sign a settlement, or miss a deadline, talk to a licensed attorney in your state.

Does Homeowners Insurance Cover Contractor Damage? | OwnersBack